OWNER NOTICE!!!

PLEASE READ THIS INSTRUCTION SHEET BEFORE FIRING or CLEANING THIS FIREARM. READ YOUR INSTRUCTION MANUAL. CHECK YOUR CIMARRON FIREARM CLOSELY BEFORE LOADING & FIRING!

QUALITY INSPECTION: Every firearm is thoroughly inspected for function and cosmetic blemish prior to shipment.

REPAIR POLICY: Any firearm found to be defective must be returned to Cimarron’s authorized repair center for examination and repair. Call Hill Country Precision Gunsmithing, 830-456-8613 for the shipping address and instructions before shipping your firearm. A copy of your completed service agreement card, sales receipt or other proof of the date of purchase must be enclosed. A letter containing a detailed description of the specific problem, the owner’s name, address and phone number or email address must be received with the firearm before repair will begin. Please allow 60 days after receipt for repair to be made. Replacement will be made only if the firearm cannot be repaired. Cimarron reserves the right to make this decision. Our decision will be fair but final. See 'FIREARMS SERVICE AGREEMENT' enclosed with this firearm.
BENCH CHARGE: There is a minimum 'bench' charge of $35.00 on all firearms returned for repair. This charge is waived if the repair is covered by our repair policy.
SHIPPING DAMAGE: Every firearm is thoroughly quality inspected for damage or defect immediately before shipping. If damage or defects are found during quality inspection the firearm is not shipped. If you receive a damaged firearm it was damaged during shipment. Call Cimarron shipping for instructions. A claim must be completed before returning the firearm to Cimarron. It is your responsibility to work with us until the claim is filed. Damaged firearms must be returned within 30 days.
RETURN POLICY: Any firearm returned for any reason including repair must have prior approval and a return authorization number on the outside of the box. 
Call Hill Country Precision Gunsmithing at: 830-456-8613 or send mail to: 

for your R.A. number before returning firearms. Give a brief description of the problem. Any firearm received without a R.A. number will be returned. Questions regarding returns should be directed to Hill Country Precision Gunsmithing.
RETURN PACKAGING: Requirements: SAVE THE BOX and PACKING MATERIAL. Firearms must be packaged for return exactly as they were packed when received by the dealer. Specifically:
1. Firearm must be oiled and wrapped in the plastic bag as received.
2. Firearm is then wrapped in bubble wrap or other similar packaging material as received by dealer to prevent movement in the box while in transit.
3. Firearm must be placed in original box with Styrofoam or cardboard spacers in proper place in front of barrel and in back of butt as received by dealer. 
4. YOU ARE RESPONSIBLE FOR PROPER RETURN PACKAGING. CIMARRON IS NOT RESPONSIBLE FOR DAMAGE INCURRED TO THE FIREARM IN RETURN SHIPMENT. 
METHOD OF SHIPMENT: Call Cimarron Firearms Co. at (830) 997-9090 for shipping instructions and ship to address. Ship prepaid UPS, FedEx or PRIORITY MAIL, properly insured.
REFUNDS: Refunds on firearms are not allowed with the following exceptions: 1.) You receive the wrong model. 2.) The firearm is defective and cannot be repaired.
Any firearm returned for refund or exchange must be unfired in the original box and received at Cimarron Firearms in ABSOLUTELY NEW CONDITION. There is a $100.00 restocking fee on rifles and $50.00 restocking fee on revolvers refused or returned for any reason other than those listed above. Any blemishes found on returns will be repaired by Cimarron and the cost deducted from the refund in addition to the restocking fee. GUNS THAT HAVE BEEN FIRED ARE USED GUNS! There is no refund or exchange what so ever on used guns. 
VOID of WARRANTY NOTICE: Only new commercially manufactured ammunition should be used in Cimarron firearms. The USE OF RELOADS VOIDS ANY AND ALL WARRANTY on the CYLINDER, BARREL and FRAME. Cimarron cannot be held liable for reloading errors. Each firearm has been proof test fired at 1.5 times the pressure of factory-loaded ammunition before leaving the factory, thus assuring strength is sufficient for standard factory pressures. 
SIGHTS AND SIGHTING: Cimarron Single Actions, Open Tops, Richards-Mason Conversions are better built, stronger and are more accurate than the originals. Historically we find that when using properly loaded ammunition Cimarron revolvers will shoot as good or better groups than the original or guns of the same design sold by our competition. However they are not of target design and do not have adjustable sights. Most will shoot center but some may shoot slightly left or slightly right of dead center. We do not guarantee them to shoot dead center for each individuals shooting style. Cimarron will adjust the point of impact if needed for a small fee but this is not covered by our repair policy. You cannot correct sighting by bending the front sight. 
CHARCOAL BLUE WARNING: DO NOT ATTEMPT TO TOUCH UP CHARCOAL BLUE. This is a heat oxidation process. Chemical cold blue compounds will discolor the finish. DO NOT USE CLEANING FLUIDS such as lacquer thinner, acetone or bore solvents on charcoal blue, this will remove the finish. Use only lubricants such as WD-40, Tri-flow, Break Free, 3 in 1, Hoppes or Outers gun oils, Havoline, etc. Beer or Coca Cola will remove the delicate finish. Charcoal Blue is extremely delicate and with use will cause the firearm to appear aged and worn. If you do not desire an aged look we do not recommend this finish.

Questions or Comments: Click Here